How-To Guide: Installing a Corner Trim For Cladding

How-To Guide: Installing a Corner Trim For Cladding



Installing cladding by yourself can be daunting, so EnviroBuild have put together a series of how-to videos to keep things simple. With our top-tips and video tutorials, you can ensure both a quality finish and a swift installation. A detailed installation and maintenance guide for our cladding can be found on our website's resource centre.

Hyperion Corner Trims can be used on their own or with Hyperion Fascia Boards to cover cladding board edges and exposed substructure at corners, doors and window frames.

Our cladding can be used in a variety of locations and come in a stylish range of colour options, including natural browns with Oak and Walnut as well as more modern greys in Granite and Stone. Hyperion Pioneer products will naturally lighten over the first 8-10 weeks before stabilising as a result of any exposure to sunlight, as well as the natural tannins (oils) in the wood content leaching from the boards when they get wet. Due to their plastic content, there isn't any need to treat your cladding, making them easy to maintain and keep clean, with low risk of wet rot over a longer period of time. If you need more help with installation, EnviroBuild have an extensive network of reliable installers we'd happily recommend for your project. Get in contact with us and we'll put you in touch with an installer that can help bring your plans into reality.


Installation Tips:
    • Mitre down the corner trim at 45 degrees in order to place next to each other at wall edges.
    • Pre-drill and countersink before screwing the trim down.
    • If you are worried about visible screws, you can purchase coloured screws and screwcaps from general builders merchants.

Back to blog